Matrix İnfinity Çipli bi Slim kasaM waR ekRan ayaRları bozuk paL NTsc
X Screen fix Y Screen Fix fiLan hepsini karıştırdım yanLışLıkla
Oyunu taktıgımda ekran yarım şekilde gözüküyor bi kere uraştım yaptım oLdu ekran tam gösteriyordu ama tekrar ayarlara girdim biraz daha kurcalayaym dedim gene gitti lütfen yardım edin arkadaşlar.

Chip menüsünü şu an için hiç hatırlamıyoruım ama

Bu kodlar chipin bios standartları.. bunları inceleyerek istediğin ayarları yapabilirsin..


=======================
INFINITY FIRMWARE V1.75
=======================


What's new :
------------

- VGA support added
- Main language loading fix


Notes :
-------

- VGA suport was added to this firmware relase. You can now use the original blaze
vga adaptor without the boot cd and enjoy the enhanced games compatibility that
this version brings you on your vga screen (with full original ps2 browser and
dvd movies support in vga mode).

VGA mode is set to 640x480 at 60Hz (so the added bonus is that PAL games will
run 20% faster). Games are automatically centered according to the original
resolution without vertical or horizontal side artifacts (a common problem
with the original vga adapter).
PSX games are not supported at the moment but will probably be in a future
release (altough this is probably a low priority fix due to the small
improvement that vga support could bring to psx games).

When VGA mode is enabled you can access the monitor adjust screen in the config
menu by pressing SELECT. You only need to do this the first time to adjust your
monitor settings (a white border is present at the side of the screen, play with
your monitor settings so that the 640x480 screen completely fills your viewing
area).

A schematic of the cable will be soon online on our site for those skilled
in the art of patching things together ;)


- The language selected in the browser was not correctly loaded when BOOT MODE was
set to DEV1. Program automatically loaded on boot from the memory card had the
incorrect default language.



Infinity option configuration menu :
------------------------------------

Press TRIANGLE + CIRCLE to enter the configuration menu.


PS2 SCREEN FIX : OFF : Disables PS2 video fix.

COLOR : Games will be output on their original video mode (PAL/NTSC)
with color correction applied to match your PS2 region.

PAL : Force video mode to PAL

NTSC : Force video mode to NTSC

PAL60 : Force all games to NTSC with color correction.
Games will run faster but screen might need adjusting.

VGA : Enable 640x480 VGA mode.

Y SCREEN FIX : OFF : Y screen position fix is disabled.

AUTO : Y position fix enabled with default settings.
Should be fine for most television sets.

+/- N : Fine tune Y position.
Positive values move the screen down, Negative values move it up.

PSX SCREEN FIX : ON/OFF : Enable/Disable PSX screen fix

PSX MULTI DISK : ON/OFF : Enable/Disable PSX multi disk support

MC16 PATCH : ON/OFF : Enable/Disable D4TEL memory card support

ATAD AUTO PATCH : ON/OFF : Enable/Disable ATAD auto patch

MACROVISION FIX : ON/OFF : Enable/Disable Macrovision patch

GREEN FIX : ON/OFF : Enable/Disable green correction on DVD movies

DVD VIDEO REGION : 1..8 : Selects the DVD player region.
Use it to match the corresponding region on RCE protected discs.

DVD9 DL SUPPORT : ON/OFF : Enable/Disable Double Layer patch

BOOT MODE : AUTO : Normal behaviour. All discs wil autoboot.

FAST : FastBoot.
Same as pressing SELECT on boot.

INFMAN : Execute Infinity Manager on mc0:
Same as Pressing TRIANGLE on boot.

DEV1 : Execute BOOT.ELF on mc0:
Same as Pressing R1 on boot.

DEV2 : Execute BOOT.ELF on HDD
Same as Pressing L1 on boot.

DVDV : Force DVD video mode.
Same as Pressing CIRCLE on boot.

PAD DETECT TIME : 2..10 : Select time to wait for connected pad on boot.
Only useful if pad is left unconnected.

BOOT LOGO : ON/OFF : Enable/Disable Matrix boot logo.




BURNING TO CD:
--------------

- Create a directory on your desktop or other location of your HD.
- Unzip the ".cue" and ".bin" files present inside the .zip file into this directory.
- Open your preferred burning program (Nero, alcohool120%, etc etc.) and choose
option to burn a "CD-ROM ISO".
- Press the file selection button and choose file type "Image Files (.cue)".
- Navigate to the directory where you unzipped the V1.75 files and select the
"infv175.cue" file.
- Burn the CD.


UPGRADING INFINITY:
-------------------

- Insert the burned CD into the PS2 and press reset.
The CD should boot authomatically and you will be presented with the Upgrade sreen.
- Follow instructions on screen to upgrade Infinity.


**********************************************************************************

- NOTE : You can always recover from a bad flash by entering recovery mode.
==== This will let you boot the upgrade disc to reflash your Infinity.

To enter recovery mode:

V1-V12 and V14 PAL :
====================

Hold the reset button until the blue eject light turns on.


V14+ USA and JAP
================

USA : Hold reset until blue eject lights turn on, wait 3 seconds and
tap reset again.

JAP : Hold reset until blue eject lights turn on, wait 3 seconds and
tap reset, wait 3 more seconds and tap reset again.

**********************************************************************************


STANDARD OPERATION FOR THE MATRIX INFINITY:
===========================================

BOOT OF PS2 / PS1 / DVD MOVIES:
-------------------------------

- Insert the disc inside the PS2.
- The infinity will recognize the kind of disc you inserted and select
the appropriate boot system.


TURNING OFF THE INFINITY:
-------------------------

- Press START on joypad 1 until the writing "DISABLED" will appear on screen.
- Press reset once.
- The Infinity is now disabled until PS2 is turned off to Standby Position.


FAST BOOT OF PS2 GAMES:
-----------------------

- Press SELECT on joypad 1.
- PS2 Logo will be skipped and game will boot directly.


FORCING PS1/DVD MODE:
---------------------

- Press CIRCLE on joypad 1.
(This option is only needed just in case someone needs to force the PS2
to boot in PS1/DVD mode).


FORCING AUTO MODE:
---------------------

- Press CROSS on joypad 1.
Useful to temporarily skip the default boot mode when set to something
other than AUTO.


LAUNCHING MEMORY CARD APPLICATIONS:
-----------------------------------

- Press TRIANGLE on joypad 1.
- If installed, the Infinity Manager will appear and show a list of
installed applications.

-or-

- Press R1/R2/L2 on joypad 1.
- This will launch the following applications according to the button pressed :

R1 : "mc0:BOOT/BOOT.ELF"
R2 : "mc0:BOOT/BOOT2.ELF"
L2 : "mc0:BOOT/BOOT3.ELF"


LAUNCHING HDD APPLICATION (DEV2 MODE):
--------------------------------------

- Press L1 on joypad 1.
- If correctly installed, the default application will be executed from the HDD.




---

If you have any suggestion, or would like us to add some special or particual
option, feel free to mail your suggestions at: info@infinitymod.com and
we will see if it will be possible to add it in the coming releases of the
Infinity Firmware and/or the Infinity Manager.

chip menüsünü bilmediğim için söylemem zor.. eğer menünün bir resmini ekleyebilirsen düzeltmeye çalışırız..

Aynen bunlar yazıyor (: Fotoğraf çekmek isterdim ama Telefonum bozuk Malesef.

Bunu dene bakalım :) tahminim düzelecektir..

Çoook saolasın kardeşim. éLLériné SağLık.

Teşekkürler Aynı Sorun Bendede Vardi Düzelttim

bende de buna benzer sorun var chip ayarlarına nereden girebilirim

tam emin olmamakla birlikte cihaz açılırken R1+Üçgen yada R1+Kare tuşlarına basık tutuyordun. Chip menüsü aktif oluyordu. Bu menüde yapılacak döndürülemez hatalar cihazın kilitlenip pelt olmasına neden olabilir Dikkat etmek lazım..

yukarıda ki fotoğraftaki ayarlar doğru mu big_turkun eklediği

oyun takmadan cihaz açılırken R1+kare,R1+üçgen ikisini de denedim normalde olduğu gibi browserle system configuration olan ekran geldi google aradım nasıl oluyor diye oradada bişey yok siz nasıl girdiniz

cihaz açılırken üçgen + yuvarlak tuşlarıymış :) bu şekilde menüye girebilirsin.. benim verdiğim menü orjinal default menüsü..

çok teşekkürler ekran düzeldi

bende matrix kullanıyorum fakat versiyonu falan bilmiyorum ekranımda bu kadar ayrıntı yok hatta sorunumu paylaştım forumda çozume yardımcı olursanız sevinirim

http://www.playstationturk.net/forum/topic_434